01EC4265
Manufacturer
Model
01EC4265
Category
This 100uF/80V aluminum electrolytic capacitor is optimized for power supply filtering and energy storage in DC systems, offering 300mA ripple current handling and ±20% tolerance. It is suitable for industrial motor control and renewable energy storage buffers when operated below 105°C. Designers should prioritize low-temperature soldering and thermal management to maintain lifespan, with limitations in high-frequency applications due to ESR characteristics.
Reference Pricing
Reference Stock
Specifications
| Capacity | 100μF |
| Dimensions | Φ8*15L |
| ESR | 0.10 |
| Frequency Response | N/A |
| Leakage Current | 175μA |
| Life | 10000 hours |
| Operating Temperature Range | -25℃ to +105℃ |
| Package Type | DIP,D8xL15mm |
| Rated Voltage | 80V |
| Temperature Coefficient | N/A |
Function And Role
Core Function
Filtering and energy storage in power supply circuits
Key Characteristics
- 100uF capacitance
- 80V voltage rating
- 700mΩ ESR at 100kHz
- 300mA ripple current at 100kHz
- ±20% tolerance
- 8mm diameter x 15mm height
- 3.5mm pin spacing
Application Domains
Basic Scenarios
- Power supply filtering
- Decoupling in electronic circuits
- Energy storage for low-voltage DC systems
Extended Scenarios
- Industrial motor control systems
- Renewable energy storage buffers
- High-frequency decoupling in switch-mode power supplies
Precautions
| Soldering | Use low-temperature solder (≤300°C) to prevent thermal stress |
| Current Limit | Do not exceed 300mA ripple current at 100kHz operating frequency |
| Voltage Limit | Max working voltage must remain below 80V |
| Thermal Management | Limit continuous operation at >105°C to prevent reduced lifespan |
| Storage | Store in cool (<30°C), dry environments away from conductive dust |
| Risk Warnings |
|
Alternative Model Params
- Capacitance tolerance (±20%)
- ESR at 100kHz
- Ripple current rating
- Voltage derating vs. temperature
Design Recommendations
| Layout | Place close to power entry pins with minimum 5mm trace spacing |
| Thermal | Use copper pours for heat dissipation if operating >85°C |
| Compatibility | Verify with 10V-100V SMPS designs for ESR requirements |
| Testing | Perform high-frequency ESR measurement post-soldering |
Market Positioning
| Strengths |
|
| Weaknesses |
|