0.8-7PLT
Manufacturer
Model
0.8-7PLT
Category
The SHOU HAN 0.8-7PLT connector is a cost-effective SMD wire-to-board solution with 7 pins, 0.8mm pitch, and 500mA current handling. Ideal for consumer electronics, industrial controls, and automotive interiors where space efficiency and RoHS compliance are critical. Its tin-plated copper alloy contacts ensure reliable connections in -25°C to +85°C environments, with soldering instructions emphasizing temperature control to prevent pad damage. While suitable for low-voltage applications, its current handling and protection features are best suited for non-high-power scenarios requiring compact, reliable interconnect solutions.
Reference Pricing
Reference Stock
Specifications
| Electrical Performance | {"Rated Voltage": "30V AC DC", "Rated Current": "0.5A AC DC", "Contact Resistance": "\u226420m\u03a9", "Insulation Resistance": "\u2265100M\u03a9", "Dielectric Strength": "\u2265200V AC/minute"} |
| Interface Type | Not provided |
| Material | Phosphor bronze |
| Operating Temperature Range | Not provided |
| Pins | Not provided |
| Pitch | Not provided |
| Welding Method | Not provided |
Function And Role
Core Function
Provide a secure connection between wires and printed circuit boards (PCBs) in electronic systems.
Key Characteristics
- 1x7P pin configuration
- 0.8mm pitch spacing
- Tin-plated contacts for corrosion resistance
- 500mA current rating
- 30V voltage rating
- Copper alloy contact material
- Vertical mounting design
- Operating temperature range of -25°C to +85°C
Application Domains
Basic Scenarios
- Consumer electronics assembly
- Industrial control systems
- Automotive interior wiring
Extended Scenarios
- Medical device connectivity
- IoT sensor node installations
- Automotive under-hood environments
- Telecom equipment backplanes
Precautions
| Soldering | Maintain soldering temperature below 300°C and use 60-80 second dwell time per pin to prevent pad lifting. |
| Current Limit | Max continuous current should not exceed 500mA; peak current must stay below 1A for 10 seconds max. |
| Voltage Limit | Operation limited to 30V RMS; transient voltage should not exceed 50V peak. |
| Thermal Management | Ensure 10°C above ambient during operation; add 3mm spacing between adjacent connectors in high heat environments. |
| Storage | Store in <10% relative humidity, 15-25°C environments in anti-static packaging for >12 months. |
| Risk Warnings |
|
Alternative Model Params
- Pitch (must match 0.8mm tolerance ±0.05mm)
- Pin count (exact 7P required)
- Current rating (500mA minimum)
- Voltage rating (30V maximum)
- Contact plating (Tin preferred)
- Operating temperature range (-25°C to +85°C)
Design Recommendations
| Layout | Maintain 2mm trace spacing between adjacent pins to prevent crosstalk |
| Thermal | Use thermal vias under contact pads in high power applications |
| Compatibility | Verify PCB pad dimensions match 0.8mm pitch with 0.3mm pad diameter |
| Testing | Perform 500 cycle insertion force testing per IEC 61032-2 standard |
Market Positioning
| Strengths |
|
| Weaknesses |
|