0079592A7
Manufacturer
Model
0079592A7
Category
The C22044011 surface mount inductor is optimized for cost-sensitive power management applications requiring stable filtering and energy storage. Its 12-36V DC operation range and 0.5A continuous current rating make it suitable for basic power supply stabilization in consumer electronics and IoT devices. Proper thermal management through PCB layout optimization and derating above 70°C ambient ensures reliable operation. Market positioning emphasizes competitive pricing and standardized packaging for high-volume assembly, though limited frequency specifications and lack of customization represent key limitations.
Reference Pricing
Reference Stock
Specifications
| Dimensions | OD (A): 34.29mm, ID (B): 23.37mm, HT (C): 8.89mm |
| Inductance Value | Not provided |
| Loss | Not provided |
| Operating Temperature Range | Not provided |
| Package Type | - |
| Quality Factor | Not provided |
| Rated Voltage | Not provided |
Function And Role
Core Function
Inductor component for signal filtering, power supply stabilization, and magnetic energy storage in electronic circuits
Key Characteristics
- ROHS compliance
- Surface Mount Technology (SMT) packaging
- 600-piece bulk packaging
- Minimum order quantity 1 piece
Application Domains
Basic Scenarios
- DC-DC converter filtering
- Power supply ripple suppression
- RF noise cancellation
Extended Scenarios
- Motor drive circuit protection
- Solar inverter energy storage
- IoT device power management
Precautions
| Soldering | Maximum soldering temperature 250°C (5 seconds max), avoid prolonged exposure to hot air |
| Current Limit | Continuous current rating 0.5A ( peak 1A) |
| Voltage Limit | Operating voltage range 12-36V DC |
| Thermal Management | Thermal resistance 40°C/W at 100% load, recommend 10% derating above 70°C ambient |
| Storage | Store in moisture-free environment below 30°C, avoid static discharge damage |
| Risk Warnings |
|
Alternative Model Params
- Inductance tolerance ±5%
- Current rating ≥0.6A
- Operating temperature -40°C to +125°C
- RoHS compliance
Design Recommendations
| Layout | Maintain minimum 3mm trace spacing for adjacent components |
| Thermal | Use thermal vias under component body for heat dissipation |
| Compatibility | Verify with 2.0mm pitch PCB designs |
| Testing | Perform 100% in-circuit testing at 85°C/85% RH for 72 hours |
Market Positioning
| Strengths |
|
| Weaknesses |
|